|
 |
 |
   |
 |
CHANGE COLOR
- CHANGE YOUR MOOD!
Backyards
needn’t be just black or white anymore. The new Smart
Aqua Light will color your night in a Rainbow of colors.
Engineered from the latest in digital technology, the
light emitting diodes (LED’s) give an array of colors
that can be specifically selected, slowly
transitioned or viewed in a strobe-like Rainbow Flash.
LED bulbs last up to 10 times longer than regular bulbs,
use only 60 watts of energy, and have no moving parts to
break down.
NEW LED
DIGITAL LIGHT TECHNOLOGY
Because LED
technology offers independent activation to each of the
diodes in the lamp, the Smart Aqua Light LED Systems can
provide a whole new dimension of color to your pool. It
is as easy as flipping the light switch to change
between options. LED Bulbs last up to 100 times longer
then regular bulbs, use only 15 to 60 watts of energy,
and have no movings parts to break down.
|
|
CHANGE YOUR SWIMMING POOL COLOR WITH THE FLIP OF A
SWITCH
Transform the look and feel of your pool with the
amazing color changes of these hi-tech LED lights. Smart
Aqua Light is a full underwater light that can be
installed in concrete, fiberglass, vinyl and above
ground pools. Just flip the switch on your light to make
the Smart Aqua Light change colors. Smart Aqua Light
advanced LED lights change from white to blue to green
to pink to turquoise as well as 3 transformation modes
that rotate through the spectrum of colors. The light
used 90% less energy then other existing pool lights and
will last in your pool for up to 11 years! Available in
12 volt for added safety.
|
|
CONTROLLING LIGHT AND CHOOSING
LIGHTING EFFECTS |
 LED bulbs are pre-progammed
with an assortment of lighting effects. When you turn the
LED light - off - and then - on - again within 1-2 seconds,
it advances to the next effect. Effects can be controlled by
either using the pool's pre-existing light switch, or by
installing an simply Wireless Remote Control Unit. |
|
SMART AQUA LIGHT COLOR SELECTION
Description of efects: |
|
Color Select: White
Color Select: Blue
Color Select: Green
Color Select: Pink
Color Select: Turquoise
Color Transition: All
Colors Transition - Slowly
Color Transition: Blue -
Green Transition - Slowly
Color Transition: Flash
All Colors Transition - Strobe
|
SYNCHRONIZATION
 When
you turn the Smart Aqua Light LED bulb off and leave it
off for longer then 10 seconds or more, it will reset
itself and start back at the color white. If you have
one or more light system and the lights go out of
synchronization, turn them off for 10 seconds and they
wil reset to white.
Note: If in Flash (strobe) mode
using 2 or more lights, colors will not be synchronized. |
LED LIGHT SYSTEMS Make your new pool the star
attraction and mood setter for your backyard at night
with a Smart Aqua Light LED System. The two - lights
System will create subtle full coverage in most pools.
For small pools, a one - light System at the end will
create a graduated color sensation. Either System will
increase night swimming safety while enhancing the
beauty of your pool.
LOW VOLTAGE LIGHT SYSTEM - FOR
ADDED SAFETY
The Smart Aqua Light Systems, have been
engineered with pool
safety in mind. The low voltage system (12 V CA) with a
ground fault circuit intterupter (GFCI) meets most of
the international electrical standards. |
|
simply
change your ordinary light bulb with any of the two
models Sealed Beam LED Hi-Tec. In 10 minutes you can
change the look of your pool to an amazing rainbow of
colors. Smart Aqua Light LED bulbs are standard PAR56,
waterproof with 108 to 252 independent LED units
inside. Also Smart Aqua Light LED bulbs are pre-programmed
up to 16 independent effects.
FEATURES:
